Elastomeric Bungee Ready Mount for Uwatec Digital Bottom Timers

* Modified for Aladin Tec/Tec 2G

This replacement mount is lower profile, and is designed to accept 1/8 in. to 3/16 in. diameter Bungee Cord. Bungee Cord mounted gauges are far easier to don than Buckled straps, and are depth compensating.

AUD$15

Elastomeric Bungee Ready Mount for Suunto Vyper / Vyper 2 /Vytec / Gekko

This new boot is similar to our popular boots for the Uwatec Digital Bottom Timer and Suunto SK7 Compass as seen below.
A replacement “boot” or Mount for the Popular Suunto Vyper /Vyper 2/ Vytec Dive Computer. Long the favorite of serious divers, the Vyper / Vyper 2/ Vytec Dive Computer, but the factory boot and wrist strap is not a favorite, hard to don.
Our replacement mount securely retains the computer with an easy snap in fit. Low profile and designed to accept 1/8 in. to 3/16 in. diameter Bungee Cord. Bungee Cord mounted gauges are far easier to don than Buckled straps, and are depth compensating.
Simple, secure, snap in installation, tough elastomeric material, remains flexible at low temperatures.
Several different bungee lacing methods are possible, one continuous piece, Two separate loops, etc.

AUD$30

Elastomeric Bungee Ready Mount for Suunto SK7 Compass

A replacement “boot” or Mount for the Popular Suunto SK7 Compass. Long the favorite of serious divers, the SK7 compass will still operate even when tilted off level. The factory boot is not a favorite however, hard to don, and too tall.
This replacement mount is lower profile, and is designed to accept 1/8 in. to 3/16 in. diameter Bungee Cord. Bungee Cord mounted gauges are far easier to don than Buckled straps, and are depth compensating.
New version will work with both black & white friction rings.
This mount can be fitted with one continuous bungee, (as shown in the photos) or two separate loops for redundancy.
Simple, secure, snap in installation, tough elastomeric material, remains flexible at low temperatures.

AUD$20

Elastomeric Bungee Ready Mount for Liquivision X1

A replacement “boot” or Mount for the increasingly popular LiquiVision X1

This replacement mount is designed to accept 1/8 in. to 3/16 in. diameter Bungee Cord. Bungee Cord mounted gauges are far easier to don than Buckled straps, and are depth compensating.

This mount can be fitted with one continuous bungee, or two separate loops for redundancy.

Simple, secure, snap in installation, tough elastomeric material, remains flexible at low temperatures.

AUD$20

Note: BUNGEE CORD IS NOT INCLUDED WITH MOUNTS. IT IS AVAILABLE AND SOLD SEPARATELY